Uniden UBC785XLT User Manual

Page 34

Note: The delay periods are as follows:

• None: Delay feature off

• 1 sec.: Delays for 1 sec. before re-scanning

• 2 sec.: Delays for 2 sec. before re-scanning

• 4 sec.: Delays for 4 sec. before re-scanning

• Infinite: Stays on until RSM is pressed

• -2 sec.: Stays for 2 sec. only before re-scanning *

• -5 sec.: Stays for 5 sec. only before re-scanning *

• -10 sec.: Stays for 10 sec. only before re-scanning *

* Setting negative delay periods are useful if you are only interested in small seg-

ments of conversations. For example: If you set a -5 second delay, you will only
hear 5 seconds of the conversation and then the scanner will resume scanning,
whether or not the conversation is finished.

☞ Remember! You can also use ▲ or ▼ instead of rotating the VFO.

Also instead of pressing E, you can press the VFO control.

Channel Lockout

You can lockout any channel so it is not checked during scanning.
The locked out channel can be restored.

Lockout in Hold Mode

1. Press

▲/HOLD.

2. Enter the channel number you want to lock out using the

keypad, then press

▲/HOLD again.

––– OR –––

Rotate the VFO up or down to change the channel.

3. Press L/O.

L/O appears on the display.

C 001
141.5000 FM

UNIDEN Group A

UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 30