beautypg.com

Password, Keyboard, Password -7 keyboard -7 – Toshiba M400 User Manual

Page 209: Password keyboard

background image

User’s Manual

9-7

Troubleshooting

Real Time Clock

Password

Keyboard

Keyboard problems can be caused by your setup configuration. For more
information refer to Chapter 5,

The Keyboard

.

Problem

Procedure

The following
message is Displayed
on the LCD screen:

RTC battery is
low or CMOS
checksum is
inconsistent.
Press [F1] key to
set Date/Time.

The charge in the RTC battery has run out - you
will need to set the date and time in the BIOS
setup using the following steps:

1. Press F1 key. BIOS setup will boot up.

2. Set the date in System Date.

3. Set the time in System Time.

4. Press End key. Confirmation message will

appear.

5. Press Y key. BIOS setup will terminate and

the computer will be rebooted.

Problem

Procedure

Cannot enter
password

Refer to the

TOSHIBA Password Utility

section in

Chapter 6, Power and Power-Up Modes.

Problem

Procedure

Some letter keys
produce numbers

Check that the numeric keypad overlay is not
selected. Press Fn + F10 and try typing again.

Output to screen is
garbled

Make sure the software you are using is not
remapping the keyboard. Remapping involves
reassigning the meaning of each key. See your
software’s documentation.

If you are still unable to use the keyboard,
consult your dealer.