Tripp Lite B051-000 IP - Manual (Page 51)

51
ANMS
RADIUS Settings
AP Operation
The Advanced Network Management Settings dialog box allows you
to set up login authorization management from an external source.
The settings on this page are described below:
To allow authorization for the B051-000 through a RADIUS server, do the following:
1. Check Enable in the RADIUS section of the ANMS screen.
2. Fill in the IP addresses and port numbers for the Primary and Alternate RADIUS servers.
3. In the Timeout field, set the time in seconds that the B051-000 waits for a RADIUS server reply before it times out.
4. In the Retries field, set the number of allowed RADIUS retries.
5. In the Shared Secret field, key in the character string that you want to use for authentication between the B051-000 and the RADIUS Server.
6. On the RADIUS server, set the access rights for each user according to the information in the table below:
Character Meaning
C Grants the user administrator privileges, allowing the user to configure the system.
W Allows the user to access the system via the Windows Client program.
J Allows the user to access the system via the Java Applet.
L Allows the user to access log information via the user’s browser.
V Limits the user’s access to only viewing the video display.
S Allows the user to use the Virtual Media function.
RADIUS Server access rights examples are given in the table, below:
String Meaning
C, W User has administrator privileges; user can access the system via the Windows Client
W, J, L User can access the system via the Windows Client; user can access the system via the Java Applet; user can access log
information via the user’s browser.
Note: Characters are not case sensitive. Characters are comma delimited.