Tripp Lite B051-000 IP - Manual (Page 38)

38
Hotkey Setup (continued)
Video Settings
The Java Applet
Action Description Default Hotkey
Toggle Screen
Mode Toggles the screen display between full screen and windowed modes. Alt + F
Adjust Video Brings up the video setting dialog box. Alt + V
Toggle OSD Toggles the control panel Off and On. Alt + O
Toggle Pointer
Display Toggles the local mouse pointer Off and On, so you can choose to show local and remote mouse pointers
at the same time, or only the remote mouse pointer. Alt + P
Adjust Mouse Synchronizes the movement of the local and remote mice. Alt + M
Substitute ALT
key Although all other keyboard input is captured and sent to the remote computer, [Alt + Tab] and [Ctrl + Alt
+ Del] are sent to your local computer. In order to implement their effects on the remote system, a function
key is substituted for the Alt key. If you substitute the F12 key, for example, you would use [F12 + Tab] and
[Ctrl + F12 + Del]. F12
Exit remote view Ends the remote connection to the B051-000 and returns to local operation. Alt + E
Configuring the Hotkeys
If you find the default Hotkey combinations inconvenient, you can configure your own by following these steps:
1. Highlight the Action and click Start.
2. Key in the new combination. The key names appear in the Key field as you press them.
3. Click Set.
4. Click Close.
Note: Hotkey commands must be one key at a time, unless they are combined with the [Ctrl], [Alt] or [Shift]. In the case of combined keys, both
keys must be pressed at the same time, the same as you would do when pressing [Ctrl] + [Alt] + [Delete].
The Video settings dialog box allows you to adjust the placement and
picture quality of the remote screen (as displayed on your monitor).