Answering a (co line) – Toshiba Strata DK User Manual
Page 116
DSS Console
Features
104
Strata DK Electronic Telephone 5/00
➤
To transfer call with camp-on to a busy station
Answering a (CO Line)
If your DSS Console is equipped with a
&2
button, you can answer CO Line calls
from the console as you would from a electronic telephone. See
beginning on
for detailed information.
➤
Press the flashing
&2
.
When the called station answers the call, the [DSS]
LED stays steady red, and the CO LED becomes
steady red.
If the station does not answer before a period set in
system programming, the call recalls your station.
1. Press [DSS]
corresponding to the
busy station.
You may hear a busy tone. The original caller is
placed automatically on hold. The CO or [DN] LED
flashes at double the on-hold rate, and the [DSS] LED
remains steady red.
2. Hang up.
The call rings the called station once with the camp-on
tone. While the called station is receiving this tone, the
CO LED on your telephone flashes (on-hold rate) or if
you are on a [DN] button, it goes idle. The [DSS] LED
remains steady red.
When the called station answers the transferred call,
the CO LED becomes steady red. The [DSS] LED
remains steady red.
Note
If the busy station is in the DND mode, the
call is not transferred, but recalls your
telephone immediately.
If the call is not answered after a specified recall time
set in system programming, camp-on is cancelled and
the transferred call rings back.