Toshiba Strata DK - Manual (Page 101)

LCD Operation
Messages
Strata DK Electronic Telephone 5/00
89
Station Messages
You can create up to 10 station messages (10~19). Once entered, a message can never
be deleted; only overwritten. This is a station option that is enabled in system
programming.
➤ To enter/store a station message
➤
To set an advisory message for incoming calls
1. Press /&' 0
...or [PDN] + .
The LCD M or [PDN] LED
flashes.
2. Enter the two-digit
message number
(10~19) to be stored.
The current message, if any, is displayed.
3. Enter the message.
(See “To enter LCD
characters” on Page
86
.)
The LCD M or [PDN] LED lights, and the message
displays. The message is now stored in system
memory.
4. Repeat Steps 1~3 for
any additional
messages you want to
store.
5. Press /&' 0
...or 63.5 .
The message displays on your LCD as an Advisory
Message (see below). To cancel the message display,
press [PDN] and dial
or press /&' 0 .
1. Press
/&' 0
...or a [PDN] + .
The LCD M or [PDN] LED
flashes.
MSG NO. ?
MSG NO. ?