Toshiba IPR16-X - Manual (Page 59)

43
Auto Sequencing Setting
Auto Sequencing is used either in the main screen when Auto Sequencing has been enabled or when a Spot-Monitor out signal is
used to display on a spot monitor. Auto Sequencing conveniently displays video channels and at specified intervals, sequences
through each selected channel.
1 Division Tabs These three tabs present the various division options for Auto Sequencing.
Ex: 4 division creates a quad-display.
2 Channel Selection Click each channel to include in Auto Sequencing.
3 Select All Clicking this button causes all channels to be included in Auto Sequencing.
4 Auto Sequencing settings This area allows users to define settings for Auto Sequencing. Custom Mode allows users
to define non-standard divisions. Skip 0 FPS Channel causes cameras with no video
signal to be skipped. The Interval Menu allows users to select the interval (in seconds)
between switching Cameras.
5 Division selections Each Division Section allows the user to define which cameras will be included in the
sequence. Check individual Cameras to include in the Auto Sequence.