Thecus Technology N299 - Manual (Page 78)

3. When MAC OS X is trying to connect N299, it will ask for a User Name and
Password which has access to the folder.
4. When MAC OS X has connected to the N299 successfully, an icon
representing the folder will appear on the MAC OS X desktop. You can
access the folder by double clicking on the icon.
USB Storage Expansion
The N299 supports external USB hard disks through its two USB ports. Once a
USB hard disk has been successfully mounted, users can access the files on the
USB hard disk under the USBHDD folder. The N299 supports up to 6 USB
external storage devices. All file names on the USB disk volume are case sensitive.
Before attaching a USB disk drive to N299, you have to partition and format it on
a desktop computer or a notebook first. The attached device will be located at
\\192.168.1.100\usbhdd\usb1\1\
where 192.168.1.100 means the IP address
of N299, usb1 stands for the first USB device, and 1 stands for the first partition
on disk #1, the USB disk drive. If it is an NTFS partition, NAS users can open or
copy files from \\192.168.1.100\usbhdd\usb1\1 but cannot add new files or
modify existing files.
NOTE If you want to write to an USB storage device, the file syst
USB Storage FAT32 Partition N
em must be FAT32.
TFS Partition
78
Replacing Damaged Hard Drives
If you are using RAID 1, you can easily replace a damaged hard drive in the
Thecus N299 while keeping your data secure with the system’s automatic data
recovery.
Hard Drive Damage
When a hard drive is damaged, its LED glows a steady red. If there is data in the
RAID volume, the system LED also glows red and the system beeps.
Read OK OK
Write OK -