Transition Networks SISGM1040-244 - Manual (Page 48)

Transition Networks SISGM1040-244
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
spanning-tree
hello-time [seconds]
G Use the spanning-tree
hello-time global
configuration
command to specify
the interval between
hello bridge protocol
data units (BPDUs).
switch(config)#spanning-tree
hello-time 3
spanning-tree
forward-time [seconds]
G Use the spanning-tree
forward-time global
configuration
command to set the
forwarding-time for the
specified
spanning-tree
instances. The
forwarding time
determines how long
each of the listening
and
learning states last
before the port begins
forwarding.
switch(config)#spanning-tree
forward-time 20
stp-path-cost
[1~200000000]
I Use the spanning-tree
cost interface
configuration
command to set the
path cost for Spanning
Tree
Protocol (STP)
calculations. In the
event of a loop,
spanning tree
considers the path
switch(config)#interface
fastEthernet 2
switch(config-if)#stp-path-cost 20