Olympus SZX10 - Manual (Page 27)

23
SZX10
9-3 Revolving Nosepiece SZX2-2RE10
}The revolving nosepiece allows two objectives to be mounted. This makes objective switching easy by simply rotating
the revolving nosepiece and expands the range of observation magnifications.
1 External View
Nosepiece mount
Hand guard
Allen wrench
(for M3 screws)
Objective mounts
Clamping screws
(M3, 6 mm long, x 3)
1. Remove the observation tube from the zoom microscope body.
2. Remove the zoom microscope body and focusing assembly from the
pillar, and place them upside down on a flat desk surface.
# Place a soft sheet made of rubber or similar material on the desk
surface.
3. Remove the objective from the zoom microscope body and then remove
the objective mount ² by loosening the three clamping screws @ using
the provided Allen wrench (for M3 screws). (Fig. 27)
2 Assembly (Figs. 27 to 29)
Fig. 27
@
²