Olympus SZX10 - Manual (Page 15)

11
SZX10
5 (Fig. 12)
}Pull out the light path selector knob @ to set the light path for the right
eyepiece to the TV/photomicrography light path.
(The following table shows the intensity ratio of each light path in %.)
Trinocular Tube Pushed-in
Selecting the Light Path of the
Trinocular Tube
Pulled-out
SZX2-TR30
SZX2-TTR
( )
Right
Binocular 100%
Left
# Always push or pull the light path selector knob @ all the way into
a stop position. Do not attempt to force the knob past the stop
position. Applying excessive force could destroy the mechanism.
Binocular 50%,
TV/photo 50%
Binocular 50%
SZX2-TR30PT
SZX2-TTRPT
( )
Right
Binocular 100%
TV/photo 100%
Left Binocular 100%
6 Adjusting the Tilt (Fig. 13)
}Adjust the height and tilt of the observation tube to the most comfortable
viewing position.
Holding the binocular assembly with both hands, raise or lower it to the
desired position.
# Do not attempt to force the binocular assembly past the upper or
lower stop position. Applying excessive force could destroy the
mechanism.
Fig. 12
@
Fig. 13