Toshiba PERCEPTION 4000 - Manual (Page 74)

The other party will automatically be placed on “soft hold.”
Each time, the two calls will be switched.
NOTES:
1. You cannot place calls to a paging device or dictation machine, or
calls to/from an attendant, on hold.
2. If you hang up at any time while you have a call on “soft hold,” the
call will immediately recall your station.
3. You cannot use the SWAP key to alternate between parties on two
different lines. In this case, each call must be placed on “hard hold”
by using the HOLD key.
THREE-WAY CALLING
You can connect to two parties simultaneously to form a three-way
conference. Once connected, you can drop one par ty from the
conference and maintain a connection with the other party, or you can
place one of the parties on “soft hold” and alternate between party
connections (see Consultation Hold and Swap). You can perform a call
conference consisting of more than three members only if your station
has the Eight Party Conference call allowance. Refer to Eight Party
Conference for operational procedures regarding this feature.
The connected party will be placed on “soft hold.” Listen for recall dial
tone.
The call will proceed as a normal call. When the called party answers,
you will be connected to the party.
PERCEPTION 4000 FEATURE OPERATION
4-48
4. When connected to the called
party, press the SWAP key to
automatically connect to the
held party.
5. You can alternatively connect
to each party by repeatedly
pressing the SWAP key.
To Form a Three-way
Conference:
1. Establish a two-way
connection.
2. Press the CONF/TRNS key.
3. Dial the station or directory
number of the other member
to be included in the
conference.