Toshiba PERCEPTION 4000 - Manual (Page 39)

NOTE:
If the held party hangs up before the call is retrieved, the line appearance
LED will go out and, if you attempt to retrieve the call, you will hear dial
tone.
CALL PARK
By using the Call Park feature, you can hold an active call at any
extension, and then retrieve the call at the same (Local) or another
(Remote) extension. Calls can be parked on any prime or logical line,
allowing stations with multiple line appearances to have more than one
call parked at the station. Only one call can be parked on a particular
line.
Any of your telephone’s line appearances can be used.
Listen for success tone. The call will be parked on your telephone’s prime
line, regardless of which line the call was on originally.
If the call is not retrieved within a predetermined time period, the call will
recall your station’s prime line.
When using a CP-L key, the CP-L LED will light solid red and will remain
lit while the call is parked.
After activating Call Park, reorder tone will sound if you do not hang up
within a predetermined time period.
2. Wait to be connected to the
held call.
To Park a Call Locally:
1. Establish a two-way
connection.
2. Press the Call Park—Local
(CP-L) access key.
. . . or . . .
Press the CONF/TRNS key
and then enter the Call
Park—Local access code.
To Retrieve a Call Locally:
1. Go off-hook to retrieve the
locally-parked call on the line
provided by your station’s line
preference type.
. . . or . . .
Press an idle line key to
retrieve the parked call on a
line other than that
automatically provided by your
station’s line preference.
PERCEPTION 4000 FEATURE OPERATION
4-13