TOA Electronics M-9000 - Manual (Page 27)

27
11.3.2. Audio output setting
The screen display examples shown below may differ from actual displays.
The on-screen indications shown in red here (actually shown by flashing cursors) are parameters or setting contents to be selected with the Parameter setting knob, input channel selection key or other designated keys.
Unless otherwise specified, the indications of the [ ], [ ], [
], and [ ] arrows represent that the screen is switched with the Screen shift key.
OUTPUT SEL
OUTPUT SEL
O U T P U T – S E T T I N G S E L E C T O U T P U T C H
Output channel selection PARAMETER
O U T 1 – _ _ _ _ _ _ _
Output channel 1 name setting (p. 34)
OUTPUT SEL
O U T 2 – _ _ _ _ _ _ _
Output channel 2 name setting
OUTPUT SEL
OUTPUT SEL
O U T 3 – _ _ _ _ _ _ _
Output channel 3 name setting
OUTPUT SEL
O U T 8 – _ _ _ _ _ _ _
Output channel 8 name setting
Output channel 1 name setting
(For the channel on which the T-001T is used)
Note
Any output channel name setting screen can
return to the output channel selection screen
using the Left shift key.
UTILITY MEMORY
Normal operation mode
Setting menu screen
Press for over 2 seconds.