Tascam CD-302 - Manual (Page 19)

3 • Basic operations—Loop play
TASCAM CD-302
19
duration is shown for two seconds, and the display
then returns to its previous state.
3.4.8 SINGLE loop
This plays back one track continuously, looping
between the start and end of the track.
1 Press the PRESET key.
2 Select 01 LOOP ( LOOP ) using the dial or
numeric keys.
3 Press the ENTER key.
4 Select S ( S) .
5 Press the ENTER key. The SINGLE indicator
lights in the display.
6 Press the LOOP key. The LOOP key lights, and
the LOOP indicator in the display also lights.
3.4.9 ALL loop
1 Press the PRESET key.
2 Select 01 LOOP ( LOOP ) using the dial or
numeric keys.
3 Press the ENTER key.
4 Select ALL ( ALL) .
5 Press the ENTER key. The ALL indicator lights
in the display.
6 Press the LOOP key. The LOOP key lights and
the LOOP indicator in the display also lights.