Tascam CD-302 - Manual (Page 16)

16
TASCAM CD-302
3 - Basic operations
3.1 Playback operations
3.1.1 Playback
Load a disc in the player, and press the PLAY/PAUSE
key.
The PLAY/PAUSE key lights in playback mode.
3.1.2 Pause
If you press the PLAY/PAUSE key during playback,
the unit enters pause mode, and the PLAY/PAUSE
key starts blinking.
3.1.3 Stop
The CD-302 has no STOP key. If you have turned on
the Direct mode (preset function 20), you can press
the
OPEN key (on the main unit or on the remote
control unit) and eject the disc even during playback.
3.2 Play modes
Press the SINGLE key, to select between the follow-
ing play modes:
• all tracks playback
• single track playback
• programmed playback (up to 30 tracks can be
entered)
3.2.1 Cross-play
The term “cross-playing” refers to the stopping of
one deck and automatic starting of the other deck.
To start cross-playing:
1 With one deck playing, and the other stopped,
press and hold down the
ENTER key of the
deck that is stopped.
2 Press the PLAY key of the stopped deck.
The deck currently playing back will stop, and
the deck whose keys have been pressed will
start playback.
3.3 Cueing
3.3.1 CUE
If a cue point has been stored, press the CUE key to
locate to the cue point, and pause there.
To test playback from the cue point, press and hold
down the
CUE key. When the CUE key is released,
the playback position will return to the cue point and
re-enter pause mode.
There are two ways to set the cue point. Choose the
way to set the cue point following the procedure
below:
1 Press the PRESET key.