Toshiba e-STUDIO161 - Manual (Page 67)

APPENDIX
61
8
* The first-copy time and warm-up time may vary depending on the power-supply voltage, ambient temperature, and
other operating conditions.
Printer Function
Operating conditions Temperature: 15°C to 30°C (59°F to 86°F), Humidity: 20% to 85%
Noise level
Sound Power Level LwA(1B=10dB)
Copying: 6.2[B]
Standby: 3.1[B]
Sound Pressure Level LpA (bystander positions)
Copying: 48[dB(A)]
Standby: 16[dB(A)]
Sound Pressure Level LpA (operator position)
Copying: 50[dB(A)]
Standby: 18[dB(A)]
Noise emission measurement in accordance with ISO 7779.
Emission concentration
(measured according to
RAL-UZ62) Ozone: 0.02 mg/m
3
or less
Dust: 0.075 mg/m 3 or less
Styrene: 0.07 mg/m
3
or less
Print speed 12 ppm
Resolution 600 dpi
Memory 16 MB
Emulation GDI
Interface
IEEE1284 parallel connector/
USB connector (USB1.1)
Interface cables
[Parallel cable]
Shielded bi-directional (IEEE1284) cable (max. length 3 m (10 feet))
Please purchase a commercially available parallel cable.
[USB cable]
Shielded twisted pair cable (max. length 3 m (10 feet))
Please purchase a commercially available USB cable.
As a part of our policy of continuous improvement, TOSHIBA reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from these values in individual units.
Note