Toshiba B-SV4T-GS10-QM - Manual (Page 7)

1. PRODUCT OVERVIEW ENGLISH VERSION
1.1 Introduction
• When purchasing the power cord
Since the power cord set is not enclosed in this unit, please purchase an approved one that meets the following standard from
your Authorised TOSHIBA TEC representative.
(As of June 2003)
Country Agency
Certification
mark
Country Agency
Certification
mark
Country Agency
Certification
mark
Australia SAA Germany VDE Sweden SEMKKO
Austria OVE Ireland NSAI Switzerland SEV
Belgium CEBEC Italy IMQ UK ASTA
Canada CSA Japan METI UK BSI
Denmark DEMKO Netherlands KEMA U.S.A. UL
Finland FEI Norway NEMKO
France UTE Spain AEE
Power Cord Instruction
1. For use with 100 – 125 Vac mains power supply, please select a power cord rated 125V, 7A or 10A.
2. For use with 200 – 240 Vac mains power supply. Please select a power cord rated Min. 250V, 2.5A or 5A.
3. Please select a power cord with the length of 1.8m to 3m.
Country/Region
Power Cord
Rated (Min.)
Type
Conductor size (Min.)
North America
125V, 7A or 10A
SVT, SJT or SPT-2
No. 18AWG
Europe
250V, 2.5A
H05VV-F or H05VVH2-F
0.75 mm
2
United Kingdom
250V, 3A or 5A
H05VV-F or H05VVH2-F
0.75 mm
2
Australia
250V, 7.5A
H05W-F
0.75 mm
2
Plug Configuration
E1- 2