Toshiba B-SV4T-GS10-QM - Manual (Page 23)

3. MAINTENANCE ENGLISH VERSION
3.2 Care/Handling of the Media
E3- 3
3.2 Care/Handling of the
Media
• Do not store media for longer than the manufacturer’s recommended
shelf life
• Store media rolls on the flat end. Do not store them on the curved
sides as this might flatten that side causing erratic media advance and
poor print quality.
• Store the media in plastic bags and always reseal after opening.
Unprotected media can get dirty and the extra abrasion from the dust
and dirt particles will shorten the print head life.
• Store the media in a cool, dry place. Avoid areas where they would be
exposed to direct sunlight, high temperature, high humidity, dust or
gas.
• The thermal paper used for direct thermal printing must not have
specifications which exceed Ca 2+ , K + , Na + 800 ppm, and Cl - 600 ppm.
• Some ink used on pre-printed media may contain ingredients which
shorten the print head’s product life. Do not use labels pre-printed
with ink which contain hard substances such as carbonic calcium
(CaCO
3
) and kaolin (Al
2
O
3
, 2SiO
2
, 2H
2
O).
For further information, please contact your local distributor or your
media manufacturer.
CAUTION!
Be sure to carefully review and
understand the Supply
Manual. Use only media
which meets specified
requirements. Use of non-
specified media may shorten
the head life and result in
problems with bar code
readability or print quality. All
media should be handled with
care to avoid any damage to
the media or printer. Read the
guideline in this section
carefully.