TOA Electronics C-RM500 - Manual (Page 44)

44
7.3. Connection to the Multi-Switcher's RS-232C Terminal
• When connecting the camera's video output cable to the Multi-Switcher, match the Multi-Switcher's camera
input terminal number with the camera's address number.
• The C-CC551 and C-CC554 Combination cameras permit settings of up to 255 camera positions (camera
orientation), and the C-CC501 and C-CC504 permit settings of up to 64 positions. All are equipped with 8
alarm input terminals. To expand the alarm input, connect the C-AL80 Alarm Input Unit to the C-RM500
Remote Controller.
• To switch the display to the fixed camera output when an alarm signal is received, connect a sensor to the
switcher's alarm input terminal that corresponds to the video input number the fixed camera is connected to.