TOA Electronics C-RM500 - Manual (Page 11)

5.1.6. Activating the automatic functions
When a Combination camera is connected to the system, its automatic functions can be enabled using the
Auto key.
Step 1. Press the Auto key while the camera
is selected. The camera's automatic
functions (Auto-Pan*
1 , Auto Trace* 2 ,
or Preset Sequence* 3 ) will begin to
operate.
Set the automatic functions to be enabled on the Camera Menu. (Refer to p. 40.)
* 1 The camera's automatic panning function.
* 2 Automatic repetition of manual camera operations that have been stored in memory.
* 3 Automatic sequential display of camera positions in the order that their position numbers were
selected.
Step 2. Press the Auto key again.
The Auto indicator extinguishes and
automatic operations are stopped.
5.1.7. Activating the zoom function
When a Combination camera is connected, its zoom lens can be activated using the Zoom key.
Press the Zoom ("Telescope" or "Wide Angle") key while
the camera is selected. Zooming continues as long as the
key is pressed.
5.1.8. Activating the focus function
When a Combination camera is connected, its image can be focused using the Focus key.
Press the Focus ("Far" or "Near") key while the camera is
selected. Focusing continues as long as the key is
pressed.
11
LCD screen
A U T O
AUTO AUTO
Lights
AUTO AUTO
Lights
LCD screen
M A N U A L
ZOOM
TELE
WIDE
LCD screen
M A N U A L
FOCUS
FAR
NEAR