TOA Electronics C-RM500 - Manual (Page 32)

6.4.11. Camera alarm
Select "1. ON" to use the Combination camera's alarm contact input.
Step 1. Press the Menu key to display the menu screen.
Step 2. Tilt the joystick up or down to select "CAMERA ALARM," and confirm the selection with the SET key.
The setting is displayed on Line 2.
Step 3. Tilt the joystick to the left or right to select either of the following settings, and confirm it with the
SET key.
6.4.10 Sensor alarm
Select "1. ON" to use the Sensor Alarm function.
Step 1. Press the Menu key to display the menu screen.
Step 2. Tilt the joystick up or down to select "SENSOR ALARM," and confirm the selection with the SET key.
The setting is displayed on Line 2.
Step 3. Tilt the joystick to the left or right to select either of the following settings, and confirm it with the
SET key.
32
S E N S O R A L A R M
1 . O N
C A M E R A A L A R M
1 . O N
[Setting contents]
Note: This selection is set to "1. ON" by the factory.
1. ON Uses Sensor Alarm.
2. OFF Does not use Sensor Alarm.
[Setting contents]
Notes
• When operating the alarm by setting "Camera alarm" to "2. OFF," be sure to connect the optional C-AL80
Alarm Input Unit.
• This selection is set to "1. ON" by the factory.
1. ON Uses the Combination camera's alarm contact input.
2. OFF Does not use the Combination camera's alarm contact input.