Appendix a q&a, Power does not turn on, An error message appears – Toshiba 2000 User Manual
Page 65
6F8C1111
45
Sometimes, the device does not function as you expected or you may not know what
to do next. Read this section before you suspect that the device is faulty.
If an error message appears while using an operating system command, refer to the
operating system manual.
For information concerning the use of each application program, refer to the operation
manual of the respective application program.
Power does not turn on.
Q
A
Symptom
Check
Action
Is the power cable connected to
the electrical outlet?
Turn off the AC power switch of
the power module and plug into
the electrical outlet.
See "3.1.1 Turning On the
Power"
The main unit power
does not turn on.
Is power supplied to the electrical
outlet?
Plug into proper electrical outlet.
An error message appears.
Q
A
Symptom
Check
Action
Did you turn the power off and
then back on immediately?
Wait at least 5 seconds after
turning off the power before
turning it back on.
An error message
appears during startup.
Is the BIOS set correctly?
Refer to "6.1 Setting the BIOS"
and check.
An error message
appears when using an
application program.
Refer to your application
program's operation manual.
Appendix A Q&A