Toshiba 2000 - Manual (Page 49)

3.4 About the PC card
6F8C1111
29
3
3.4.1 Installation
(1) Press the eject button of the PC card slot until the eject button pops out.
(2) Press the eject button once more.
The dummy card ejects.
(3) Remove the dummy card.
Store the dummy card in a safe place.
(4) Check the direction and insert the PC card.
Gently press the PC card all the way in and connect
securely. Do not exert excessive force.
(5) Connecting cable to the PC card.
Connect the cable in case of a card that needs a cable
such as LAN card or modem card.
After connecting the card, check that the card is ready.
Refer to the PC card environment setup in the "PC Card
Manual."
CAUTION
• Do not transport with the cable attached.
If you do, the cable connector may be damaged.
• Do not pull on the cable strongly with the cable attached. The PC card may become
loose.