Caution, 3 replacement timing of major parts – Toshiba 2000 User Manual
Page 53
4.3
Replacement Timing of Major Parts
6F8C1111
33
CAUTION
• Take extreme precaution when measuring the power supply voltage at the power
supply terminal of the module during inspection.
There is a danger of electrocution.
• Do not touch the C2 module when the power is on. The heat radiating side covers
become extremely hot (ambient temperature+20
o
C) when power is on. It cools
(ambient temperature+10
o
C) in 10 minutes when the power is turned off.
4.3
Replacement Timing of Major Parts
Listed below are the product life of major components. Periodically replace parts using
this table as reference. Contact your Toshiba service desk for information concerning
the price and ordering method of replacement parts.
Product life of major components
Parts
Location of
wear
Description
Product Life
Replacement
Interval
Action
Hard disk
drive
Mechanism Wear
5 years or 20,000
cumulative power on hours
which ever comes first.
2 years
Replace
Battery
(PS694 built-in
Ni-Cd)
Capacity
Depletion
500 power interruptions or
3 years, whichever come
first. (Ambient temperature
35
o
C)
—
Replace
Battery
(PS694M
built-in Ni-MH)
Capacity
Depletion
450 power interruptions or
1 year, whichever come
first. (Ambient temperature
35
o
C)
—
Replace
Battery
(C2 built-in)
Capacity
Depletion
10 years (Ambient
temperature 35
o
C)
10 years
Parts replacement
by overhaul
PC Card slot
Functional
parts
Wear
10000 insertions/removals —
Parts replacement
by overhaul
External FDD Mechanism Wear
5 years or 15,000
cumulative power on hours
which ever comes first.
2 years
Replace
Product life of major components
Parts
Location of
wear
Description
Product Life
Replacement
Interval
Action
Keyboard
Mechanism Wear
100,000 strokes
—
Replace
Mouse
Mechanism Wear
100,000 clicks
—
Replace
CRT
Displays
10,000 cumulative power
on hours
—
Replace
In addition to the main unit, disk drives such as the CD-ROM, and MO drive also have
a product life. Check the product life of the peripheral devices being used and replace
them before their product life expires.