1 setting the bios – Toshiba 2000 User Manual

Page 60

Text mode
Original mode

Chapter 6 Hardware Setup

Computer module C2PU37 User’s Manual

6.1

Setting the BIOS

The method of displaying the BIOS screen and the displayed content (default value) are
shown below. Check the content before using or when there is an abnormal condition.

Important

• Do not enable the suspend function when using the WDT function. This may cause a

mal-function.
The suspend function is a power saving method and cannot be used together with
the WDT function.

(1) Turn on the main unit power.

The following BIOS startup screen appears.

PhoenixBIOS X.X Release X.X.X

CPU = Pentium(R) III prosessor 500MHz

636K System RAM Passed

XXXM Extended RAM Passed

256K Cache SRAM Passed

System BIOS shadowed

Video BIOS Shadowed

UMB upper limit segment address:F0DF

Fixed Disk 0:(DISK Maker/Type)

Press to enter SETUP

BIOS startup screen