Tyco 4100U-S1 - Manual (Page 43)

3-1
A basic 4100U-S1 system becomes a network node when a Network Interface Card (NIC)
or other compatible network card is installed and connected to another network node.
How network cards connect to each other depends on the type of media cards being used.
Refer to the page number listed in this table for information on a specific topic.
Topic See Page #
Network Configuration 3-2
Introduction to the 4100 Network Interface Card (NIC) 3-4
Step 1. Configuring Network Cards 3-7
Step 2. Mounting Media Cards to the NIC 3-9
6
Step 3. Mounting Network Cards in the 4100U-S1 3-9
Step 4. Wiring Network Cards 3-10
Chapter 3
Networking
Introduction
In this Chapter