Tripp Lite B020-U08-19-IP - Manual (Page 56)

56
8. Specifications
Specification B020-U08-19-IP
Computer Ports HD18 Female (8)
KVM Cable Kit Model P778-Series
KVM Cable Kit Connectors KVM Side: HD18 Male
Computer Side: HD15 Male, USB A Male, (2) PS/2 Male
Included Cable Kits P778-006 6ft Cables (2)
Port Expansion Daisy-chain
Daisy-chain Ports DB25 Male
Daisy-chain Cable P772-Series
Compatible KVMs for Port Expansion B022-U16, B022-016
Max Number of KVM Levels in an Installation 32
Max Number of Connected Computers 504
Port Selection OSD, Hotkey, Pushbutton (Local Console Only)
External Console Ports HD18 Male, USB A Female
External Console Cable Yes
External Console Cable Connectors KVM Side: HD18 Female
Computer Side: HD15 Female, (2) USB A Female, (2) PS/2 Female
Additional USB Ports 1
Additional USB Port Version 1.1
LAN Port RJ45 Female
Firmware Upgrade Port RJ11 Female
Pushbuttons Station: Up/Down (2)
Port: Up/Down (2)
Reset Button Semi-Recessed Pushbutton
Max Resolution Supported by Built-In Monitor 1280 x 1024 @ 75Hz, DDC2B
Power ON/OFF Switch Yes
Included Power Cord C13 to 5-15P
Power Consumption 120V, 33.5W / 230V, 34W
Power I/P Rating 100-240V, 50/60Hz, 1A
Operating Temperature 0 to 50 C (32 to 122 F)
Storage Temperature -20 to 60 C (-4 to 140 F)
Humidity 0 to 80% RH, Non-Condensing
Dimensions (H x W x D, In.) 1.73 x 18.9 x 27
Weight (lbs.) 30.6
Maximum Rack Depth Supported 38 In.*
Minimum Rack Depth Supported 26 In.*
*This measurement is the distance from the rackmount brackets on the front of the unit to those on the back of the unit. The protrusion of the KVM cables
from the back of the unit, and the protrusion of the console handle from the front of the unit need to be considered in the rack installation.
8.1 OSD Default Settings
Setting Default
OSD Language English
OSD Hotkey [Scroll Lock] [Scroll Lock]*
Port ID Display Position Upper Left Corner
Port ID Display Duration 3 Seconds
Port ID Display Mode The Port Number plus the Port Name
Scan Duration 5 Seconds
Scan/Skip Mode All
Screen Blanker 0 (Disabled)
Logout Timeout 0 (Disabled)
Accessible Ports F (Full) for all users on all ports
Beeper Y (Activated)
IP Address Obtain Automatically (DHCP)
IP Installer Enabled
Working Mode Enable ICMP, Enable Device List, Enable Browser and Enable Multiuser
Mouse Sync Mode Manual
*Use of the [ Scroll Lock] key requires the [Fn] key to be held down.
201009236 93-2985.indd 56 11/18/2010 4:21:51 PM