Tripp Lite B020-U08-19-IP - Manual (Page 47)

47
7. Administration
(continued)
7.3.4 ANMS (continued)
5. Select permission from the list that appears and then click OK.
Extend and Update the Active Directory Schema – Edit Active Directory
Users with the Extended Schema
1. Run ADSI Edit. (Installed as part of the Support Tools).
2. Open domain, and navigate to the cn=users dc=tripplite dc=com
node.
3. Locate and highlight the user you wish to edit. (Our example uses
jason.)
4. Right-click on the user’s name and select properties.
5. Select the Attribute Editor tab of the screen that appears. Select
permission from the list and then click Edit.
6. Replace the value shown with the desired KVM permission attribute
value. (See table below for details.)
Permission Attribute Value
The Permission Attribute Value is made up of two parts; the IP address of
the KVM switch that the user will be accessing and a string of characters
that indicates the access rights the user has. The following rules apply to
the makeup of the permission attribute value entry:
• An ampersand (&) connects the KVM represented by the IP address to
the access rights represented by the string of characters.
• The characters of the access rights string can be entered in either upper
or lower case. The available characters and what access rights they
represent are listed in the following table.
• Each character in the access rights string is separated by a comma (,).
There are no spaces before or after the comma.
• If a user has access rights to more than one KVM, each permission
segment is separated by a semicolon (;). There are no spaces before or
after the semicolon.
Character Description
C Gives the corresponding account administrator privileges.
W Gives the corresponding account access to the KVM
switch via the Windows browser and non-browser applica-
tions.
J Gives the corresponding account access to the KVM
switch via the Java browser and non-browser applications.
L Gives the corresponding account access to the log server
on the Web Management Interface.
V Gives the corresponding account view-only access to all
ports on the KVM switch.
201009236 93-2985.indd 47 11/18/2010 4:21:49 PM