beautypg.com

Administration – Tripp Lite B020-U08-19-IP User Manual

Page 31

background image

31

7.1.4 Local Console Firmware Upgrade (continued)

7.2.1 Remote OSD List Drop-Down

7. Administration

(continued)

Firmware Upgrade Recovery

In the event of a firmware upgrade failure, or an aborted firmware upgrade, perform a firmware upgrade recovery by doing the following:

1. Power OFF the switch. If it is part of a daisy-chain, disconnect it from the chain.

2. Connect the firmware upgrade cable to the firmware upgrade port.

3. Slide the Firmware Upgrade Recovery Switch to the Recover position.

4. Power the switch back ON and repeat the upgrade procedure.

5. After the switch has been successfully upgraded, power it OFF and then slide the Firmware Upgrade Recovery Switch back to the Normal position.

6. If the switch is part of a daisy-chain, reconnect it to the daisy-chain.

7. Power the switch back ON.

7.2 Remote OSD

Upon logging into the KVM over IP, you are connected to the first
connected computer on the installation that you have access to, and the
Remote OSD

appears with the Main tab displayed. (See diagram).

Administrators

have access to all features in the OSD, whereas Users only

have access to the Main tab and Configuration tab. The administrative
settings of the Remote OSD are described in the following section.

Just like the F2 LIST function in the local console OSD, the remote OSD
allows you to determine which ports are listed on the Main tab. Simply
click on the drop-down menu at the top of the OSD screen and select an
option.

Setting

Description

ALL

Lists all of the ports on the installation that
are accessible to the logged-on user,
whether they are powered-ON or not.

POWERED ON

Lists all of the ports on the installation that
are both accessible to the logged-on user
and powered-ON.

QVIEW

Lists all of the ports on the installation that
are set as Quick View ports by an
administrator. (See page 42 for details on
Quick View ports.)

QVIEW + POWERED ON

Lists all of the ports on the installation that
are both set as Quick View ports by an
administrator and are powered ON.

201009236 93-2985.indd 31

11/18/2010 4:21:42 PM