Tripp Lite B020-U08-19-IP - Manual (Page 27)

27
7. Administration
(continued)
7.1 Local Console OSD
Upon logging into the Local Console OSD, the main page appears (see
figure). Administrators have access to all features in the OSD, whereas
Users
have access to everything except the F4 Admin page and the F6
Broadcast (BRC) function. The Local Console OSD administrative settings
are described in the following section.
7.1.1 Local Console OSD F2 LIST Function
7.1.2 Local Console OSD F3 Settings (SET) Page
This function lets you tailor the list of ports the OSD will display on the Main Screen. The submenu choices and their meanings are given in the table:
Note: The ports that are displayed in the OSD main screen are the only ports that will be affected under Broadcast Mode. (See page 15 for details on
Broadcast Mode.)
Setting Description
ALL Lists all of the ports on the installation that are accessible to the logged-on user, whether they are powered-ON or not.
POWERED ON Lists all of the ports on the installation that are both accessible to the logged-on user and powered-ON.
QVIEW Lists all of the ports on the installation that are set as Quick View ports by an administrator. (See page 29 for details on Quick
View ports.)
QVIEW + POWERED ON Lists all of the ports on the installation that are both set as Quick View ports by an administrator and are powered ON.
This function allows each User and Administrator to set up their working environment. A separate profile for each is stored by the OSD and is activated
according to the username and password provided during login. To change a setting:
1) Double-click on it, or highlight it and press the [Enter] key.
2) After you select an item, a submenu with more choices will appear. To make a selection, double-click on a choice or highlight it and press the [Enter]
key.
201009236 93-2985.indd 27 11/18/2010 4:21:41 PM