TANDBERG 1500MXP - Manual (Page 212)

TANDBERG 1500 MXP
200
Audio output connector specification:
Connector label
Audio outputs
Signal type Unbalanced
Connector (codec) Female RCA/phono, sleeve-ground,
centre-signal
Output impedance 680 ohms
Max output level when set
to maximum output level
and volume control set to
max.
Max output level when set
to minimum output level and
volume control set to max. 0.75 Vpp
0.75 Vpp
Range, menu adjustable
output gain 22.5 dB (16 steps of 1.5 dB)*
Volume control attenuation
(audio out 1) 0 to 21 dB + mute (steps of 1.5 dB)
* Additional attenuation is possible on room/loudspeaker audio output using the volume control
setting