TANDBERG 1500MXP - Manual (Page 165)

Administrator Settings
153
Signal levels -
line level inputs
Clipping level Nominal
level
Input menu level
settings Vpp dBu dBu
0.0 dB 15.5 Vpp 17.0 dBu -1.0 dBu
1.5 dB 13.0 Vpp 15.5 dBu -2.5 dBu
3.0 dB 11.0 Vpp 14.0 dBu -4.0 dBu
4.5 dB 9.2 Vpp 12.5 dBu -5.5 dBu
6.0 dB 7.8 Vpp 11.0 dBu -7.0 dBu
7.5 dB 6.5 Vpp 9.5 dBu -8.5 dBu
9.0 dB 5.5 Vpp 8.0 dBu -10.0 dBu
10.5 dB 4.6 Vpp 6.5 dBu -11.5 dBu
12.0 dB 3.9 Vpp 5.0 dBu -13.0 dBu
13.5 dB 3.3 Vpp 3.5 dBu -14.5 dBu
15.0 dB 2.8 Vpp 2.0 dBu -16.0 dBu
16.5 dB 2.3 Vpp 0.5 dBu -17.5 dBu
18.0 dB 2.0 Vpp -1.0 dBu -19.0 dBu
19.5 dB 1.6 Vpp -2.5 dBu -20.5 dBu
21.0 dB 1.4 Vpp -4.0 dBu -22.0 dBu
22.5 dB 1.2 Vpp -5.5 dBu -23.5 dBu
Table2: Signal Levels - Line level inputs
Note that for the dBu value for input clipping level and absolute max output level, a sine waveform
is assumed. If numbers in dBV are required, dBV value is 2.2 dB lower than the dBu value, e.q. -
10 dBu equals -12.2 dBV
Please see
Interfaces for details on the audio connectors.