TANDBERG 1500MXP - Manual (Page 194)

TANDBERG 1500 MXP
182
4.8.2.3 SIP Settings
Mode
On
Setting the SIP mode to on will enable the system for incoming and outgoing SIP
calls.
Off Setting the SIP mode to off will disable incoming and outgoing SIP calls from the
system.
Display Name
The Display name part of the SIP Address (URI) is usually a full name or system name.
Examples:
“Alice Wonderland”
“System 01”
SIP Address
The SIP Address is the SIP URI used to address the system.
SIP Address (URI):
Examples:
“[email protected]”
“1234”
“[email protected]”
Server Discovery
Auto
When Auto is selected, the SIP Server address is obtained using Dynamic Host
Configuration Protocol (DHCP).
Manual When Manual is selected, the manually configured SIP Server address will be
used.