TANDBERG 1500MXP - Manual (Page 16)

TANDBERG 1500 MXP
4
1.1 At a Glance
Camera
The high quality color main
camera is mounted on top of the
monitor. The main camera is
controlled manually.
Monitor
The monitor displays the far-end
and near-end videoconferencing
sites in addition to the menus.
Note that the monitor
pictures/drawings used in this
manual might differ from the
actual monitor model shipped with
the system.
Codec
The codec is the heart of the
system. Its main task is the
compression of outgoing video,
audio and data, the transmission
of this information to the far end
and the decompression of the
incoming information - the name
codec comes from a combination
of the two words compression and
decompression.
Remote Control
The remote control is used to
control all functions of the system.
If the screen saver is activated
(black monitor), touching the
remote control will automatically
wake up the system. The remote
control uses 4 AAA batteries. The
system will tell you when batteries
are running low. Change the
batteries at the back of the remote
control.
The reach of the remote control
signal is 20 meters. For users