TechniSat DigiPal 2 - Manual (Page 49)

Soft video text 800 pages memory (DigiPal 2)
1000 pages memory (DigitMod T1)
Display:
LED display 4-digit (7 segment) (DigiPal 2)
LED green and red (DigitMod T1)
Serial interface RS 232:
Type RS 232, bidirectional
Bit rate 115,2 kBit/s max.
Connection D-SUB socket, 9-pin
Function Update for operating system soft-
ware, pre-programming
Programme memory:
Number of programmes, Favourites list TV:
999 TV programmes
Number of programmes, Favourites list:
999 RADIO programmes
Number of programmes:
Total list TV/Radio: 4000 programme possible in Total
list
SFI data:
SFI preview: maximum 7 days in advance
Timer:
Events: maximum 124 (DigiPal 2)
30 (DigitMod T1) events,
one year in advance
Remote control system: RC-5
Sub-system address 10 (SAT 2)
Modulation frequency 36 kHz
Infra-red wavelength 950 nm
Optional remote control:
Sub-system address 8 (SAT 1)
Power supply:
Mains adapter:
Power consumption (DigiPal 2):
3,4 VA Stand-by mode (standby clock on)
3,0 VA Stand-by mode (standby clock off)
7 VA in operation
Nominal power supply (DigiPal 2):
230 V / 50 Hz alternating current
I
nput power supply (DigiPal 2):
180 V.... 250 V / 47 ... 63 Hz alternating current
I
nput power supply (DigitMod T1):
12 V / 0,5 A
Power consumption (DigitMod T1):
3,5 W Stand-by mode
7,5 W in operation
General:
DigiPal 2:
Dimensions (WxDxH): 205 mm x 130 mm x 35 ... 38 mm
Weight: approx. 370 g
DigitMod T1:
Dimensions (WxDxH): 155 mm x 105 mm x 30 ... 35 mm
Weight: approx. 230 g
49
Bedanl DigiPal2_DigitMod T1engl 15.06.2005 16:33 Uhr Seite 49