TechniSat DigiPal 2 - Manual (Page 42)

8.4.2 Expanded Scan
When using the expanded scan function (Fig. 8-15) you have
two options for performing a programme scan.
1. Frequency scan
When using the frequency scan mode, a specific frequency
range selected by the user will be scanned for programmes.
2. Channel scan
When using the channel scan mode, a specific range of chan-
nels selected by the user will be scanned for programmes.
The channel scan mode is faster than the frequency scan
mode.
>
Press OK to display a selection window showing the
available scan mode options.
> Use the arrow keys up/down to mark the scanning
mode you wish to perform.
> Confirm by pressing OK.
> Use the arrow keys up/down to mark either the
field Start Channel or Start Frequency.
> Use the arrow keys left/right to enter the start
channel, or use the numeric keys to enter the start
frequency.
> Use the arrow keys up/down to mark the field
Stop Channel resp. Stop Frequency, and pro-
ceed as described above to enter the stop channel or
the stop frequency.
In the line
Scan Mode you can decide whether you
wish to search only for free-to-air programmes, or
whether you wish to include encrypted programmes as
well.
> Use the arrow keys up/down to select the desired
Scan Mode.
> Press OK, to decide whether you wish to scan only for
free-to-air programmes ( Only free) or whether you
wish to include encrypted programmes ( All
Programmes).
> Press the red function key Start Scan to initiate the
programme scan.
The scan will commence. Please note any messages
displayed on the screen.
> You can terminate the scan by pressing the red func-
tion key Abort.
The scanning procedure may take more than 15 minutes.
Please note any messages displayed on the screen.
42
(Fig. 8-15)
Bedanl DigiPal2_DigitMod T1engl 15.06.2005 16:33 Uhr Seite 42