beautypg.com

TechniSat DigiPal 2 User Manual

Page 39

background image

Your receiver will now check whether SFI data is
being received on the channel selected. This infroma-
tion will be displayed along the bottom of the window.

Update time

>

In the line

Update time use the numeric keys to

set the time at which you wish the automatic downlo-
ad of SFI data to be performed.

Updating

>

To download the data of the data channel, mark the
line

SFI Updating.

>

Switch the function on by pressing

OK .

If you do not wish to receive the additional data, or if you are
unable to receive the data because of your location, the data
reception function can also be switched off:
>

Set the

SFI Updating function to off, to switch off

the data reception. Only the programme information
provided by programme providers will then by availa-
ble.

Starting download procedure manually

>

To start the updating of SFI data manually, press the

red function key Start now.

8.3 Parental control (blocking programmes)

Your unit is equipped with a parental control function. This
means that important functions (e.g. calling up the main
menu) can be protected from unauthorised manipulation. In
addition, programmes and recordings that you have specifi-
cally blocked can only be accessed after entering a four-digit
PIN code (unit PIN).
To work with the

Parental Control menu proceed as fol-

lows:
>

Press the

Menu key to display the Main Menu.

>

Use the

arrow keys up/down to mark the line

Settings.

>

Confirm by pressing

OK.

The sub-menu

Settings will be displayed.

>

Use the

arrow keys up/down to mark the line

Parental Control.

>

Confirm by pressing

OK.

The menu

Parental Control will be displayed.

(Fig. 8-10)

>

Use the

arrow keys up/down to move the marker

withing the menu, and to change the individual posi-
tions as indicated. When selecting a menu item, plea-
se also note any messages displayed on the screen.

8.3.1 Changing the receiver PIN code

The receiver PIN code is set at the factory to

0000.

To change the receiver PIN code proceed as follows:

39

(Fig. 8-10)

Bedanl DigiPal2_DigitMod T1engl 15.06.2005 16:33 Uhr Seite 39

This manual is related to the following products: