TechniSat DigiPal 2 - Manual (Page 40)

> Use the Menu key to call up the Main Menu.
> Use the arrow keys up/down to mark the line
Settings.
> Confirm by pressing OK.
The sub-menu Settings will be displayed.
> Use the arrow keys up/down to mark the line
Change Receiver PIN.
> Confirm by pressing OK.
> Now use the numeric keys to enter the current
receiver PIN code ( Default setting 0000).
(Fig. 8-11)
> Use the numeric keys to enter the desired new
receiver PIN code.
> Repeat the entry of the code.
> When you have changed the receiver PIN code as
described here, press the
Menu key to return to nor-
mal operation.
Note!
Ensure that you do not forget the receiver PIN code. If you do
forget it, please consult your specialist retailer!
8.3.2 Mode
> In this line, use the arrow keys left/right to switch
the parental control on or off.
8.3.3 Selecting a programme
> Press OK. The Favourites list of the selected range
(TV or Radio) will be displayed. The programme cur-
rently selected will be highlighted.
(Fig. 8-12)
> Press the green function key to switch back and forth
between radio and TV lists.
> Press the red function key to display a selection win-
dow. Here you have the option of selecting the desired
type of programme list.
> Use the arrow keys up/down to select the desired
type of programme list, e.g. Favourites list.
> Confirm by pressing OK. The programme list selected
will be displayed.
> Now use the arrow keys to mark the programme
which you wish to block.
> Block access to the programme by pressing the yel-
low function key. The parental control symbol
will be displayed next to the programme selected.
> To block access to a number of programmes simulta-
neously, proceed as described in 8.1.2 (
Marking
Blocks) and block the whole group by pressing the
yellow function key.
40
(Fig. 8-11)
(Fig. 8-12)
Bedanl DigiPal2_DigitMod T1engl 15.06.2005 16:33 Uhr Seite 40