TechniSat DigiPal 2 - Manual (Page 48)

Demultiplexing: in accordance with ISO 13818-1
Video decoding:
Video compression MPEG-2 and MPEG-1 compatible
Up to MP@ML (main profile @
main level)
Video standard
PAL / 25 Hz
Active screen area 720 pixels x 576 lines
Picture format 4 : 3 / 16 : 9
Picture material 16:9 Automatic adaptation for 16:9 TV
sets (via SCART)
Letterbox filtering for 4:3 TV sets
Audio decoding:
Audio compression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz
Audio parameters:
Output analogue:
Output level L/R 0,5 V r.m.s. (nominal)
Output impedance 600 Ohms
THD > 60 dB ( 1 kHz )
S/N > 60 dB
Cross-talk < - 65 dB
Input analogue:
Input level l/r 0,5 V r.m.s. (nominal)
Input impedance > 40 kOhm
Volume at switch-on Automatic output of volume level
previously selected
Dolby Digital AC3
Video parameters:
Output:
Output level FBAS 1 Vs-s +/- 0.3 dB into 75 Ohms
Output level RED 0,7 Vs-s +/- 0.1Vp-p into 75 Ohms
Output level GREEN 0,7 Vs-s +/- 0.1Vp-p into 75 Ohms
Output level BLUE 0,7 Vs-s +/- 0.1Vp-p into 75 Ohms
S/N rated > 60 dB
Connections:
TV SCART:
Output: FBAS or RGB or S-Video
VCR SCART:
Output: FBAS or S-Video
Input: FBAS or RGB or S-Video
Audio output digital:
S/PDIF output electrical, cinch socket (yellow)
Audio output analogue:
Audio channel left/right cinch sockets (white, red)
Video text:
Teletext filtering in accordance with ETS 300 472
Standard
Scanning teletext data
(FBAS) corresponding to ITU-R
BT.653-2 lines: 6-22 and 320-335
48
Bedanl DigiPal2_DigitMod T1engl 15.06.2005 16:33 Uhr Seite 48