TechniSat DigiPal 2 - Manual (Page 30)

The individual days of the week are shown along the
lower border of the screen. If information is available
for any of the following days, the corresponding fields
will be highlighted.
> To display the programme contents of a specific day,
press the appropriate
numeric key corresponding to
the day of the week.
7.14.8 Exiting SFI
> Press the Menu or TV/Radio key to return to normal
operation.
7.15 Timer recording
Your receiver is equipped with both a video recorder timer
and a programme switching timer. In terms of their program-
ming, these two timer types differ only with regard to the
respective categories..
You can programme your timer manually as described in this
chapter, or by means of the SFI function, as described in
Point 7.14.7.
1. Video recorder timer
Use a video recorder timer to switch your digital receiver on
and off in your absence, in order to record a programme by
means of an external recording unit, e.g. a video recorder.
Please note that you must also programme your video recor-
der in order to record the programme.
If the unit was switched on by means of the video recorder
timer, this will be indicated by “rec” in the display. Most of the
remote control functions will be disabled, to avoid an acciden-
tal interruption of the recording. In stand-by mode, the active
timer will be indicated by the colon in the LED resp. time
display blinking.
2. Programme change timer
If your unit is in norm,al operating mode, it will switch to the
pre-selected programme slot at the selected time. Unlike the
video recorder timer mode, all the functions of the unit remain
operational, and the unit will not be switched off at the end of
the programme.
Manual timer programming
> Press the Menu key to display the Main Menu.
> Use the arrow keys up/down to mark the line
Timer organizing.
> Confirm by pressing OK.
The sub-menu Timer organizing will be displayed.
(Fig. 7-19)
> Use the arrow keys up/down to select the type of
timer you wish to programme.
30
(Fig. 7-19)
Bedanl DigiPal2_DigitMod T1engl 15.06.2005 16:33 Uhr Seite 30