3 volume control, 4 selecting a different language – TechniSat DigiPal 2 User Manual
Page 21

7.3 Volume control
You have the facility to adjust the volume of your digital recei-
ver. This makes operating the receiver even more conve-
nient, since you can access all important functions from a
single remote control, and will rarely have to use the remote
control of your television set. When the digital receiver is
switched on it will reproduce sound at the volume level last
set.
>
Adjust the volume of your digital receiver using the
Volume + key to increase volume, and the Volume
- key to make it softer.
>
Press the
Sound on/off key to switch the sound off
(mute), press the same key again to switch the sound
back on.
7.4 Selecting a different language
If a programme is broadcast in several languages, or with
various soundtracks (Fig. 7-6), proceed as follows to select a
different language or sound channel:
>
Press the
Language Select key. A list of languages
currently broadcast will be displayed on screen
(Fig. 7-7).
>
Use the
arrow keys up/down to select the desired
language.
>
Confirm by pressing
OK.
You can now listen to the programme in the desired langua-
ge. Your digital receiver can also receive mono broadcasts.
>
Use the
arrow keys right/left to choose between
Mono Channel 1 (
), Mono Channel 2 (
) and
Stereo (
).
7.4.1 Dolby Digital (AC3 mode)*
If a programme is broadcast in Dolby Digital sound, this will
be indicated by the Dolby logo in the information window
when you switch to the programme. If the Dolby Digital (AC3)
function has been enabled as per Point 6.3.6, this program-
me will automatically be reproduced in this format.
If you have not switched on the function
Dolby Digital
(AC3), switch your receiver to AC-3 mode manually as fol-
lows:
>
Press the
Language Select key. If available, a list
of the languages currently being broadcast as well as
Dolby Digital (AC 3) will be displayed on screen.
>
Use the
arrow keys up/down to mark the line
Dolby Digital.
>
Confirm by pressing
OK.
21
(Fig. 7-7)
(Fig. 7-6)
*
valid only for DigiPal 2
Bedanl DigiPal2_DigitMod T1engl 15.06.2005 16:33 Uhr Seite 21