Toshiba TECRA S1 - Manual (Page 83)

3.2 Quick Start 3 Diagnostic Programs
TECRA S1Maintenance Manual 9
3.2.7 System Information
This function is used to read the system information. When the test complete, a file
named System.log will be saved in the defined location During the reading process, the
following screen will be displayed to indicate that the progress is in detection:
On the left column of the above screen, the detected hardware components are listed. The
corresponding information of the detected hardware components is displayed on the right
of the screen. It displays the current running status information of the check program.
The name of the program is marked on the top of the screen. At the bottom, the function
keys are listed for user operation. During the detection, keyboard operation is invalid.
When the detection finished, the hardware components information will be displayed as
follows: