Toshiba TECRA S1 - Manual (Page 179)

4.6 Touch Pad 4 Replacement Procedures
TECRA S1 Maintenance Manual 4-31
4 1
4.6 Touch Pad
Removing the Touch Pad
Remove the touch pad according to the following procedures and Figures 4-17 and 4-18.
1. Remove the touch pad by pushing it in the direction of the arrow from battery pack
position.
2. Release the following 17 latches on the touch pad cover, in that order:
- One latch on the left and three latches on the right sides
- Six top latches
- Five bottom latches
3. Push the touch pad toward right and release the five bottom latches.
Figure 4-17 Removing the touch pad
4. Disconnect the touch pad cable from CN8.