Toshiba TECRA S1 - Manual (Page 207)

4.17 LCD Module 4 Replacement Procedures
TECRA S1 Maintenance Manual 4-59
Installing the 15.0-inch LCD Module
Install the 15.0-inch LCD module according to the following procedures and Figures 4-39,
4-40 and 4-41.
1. Turn the LCD upside down.
2. Connect the LCD/FL cable to the LCD module.
3. Return the normal LCD placement.
4. Place the LCD bracket in the correct position and secure it with the two M2x3 white
bind screws on each of the left and right sides.
5. Place the LCD module in the correct position and secure it with the two M2.5x3.5
black flat-head screws and two M2x3 white bind screws.