Toshiba TECRA S1 - Manual (Page 168)

4 Replacement Procedures 4.2 Cooling Module
4-20 TECRA S1 Maintenance Manual
1. If silicon greases are already applied to the CPU and fan module, wipe them off with
a cloth.
By using a special syringe, apply silicon greases to the CPU chip so that the entire
CPU chip can be covered with the greases.
2. Place the cooling module in the correct position.
3. Fasten the four cooling module fix screws according to the order 1 till 4.
4. Connect the cooling module cable to CN1007 on the system board.