Tyan Computer Transport GS10 B2094T15 - Manual (Page 41)

41
http://www.TYAN.com
6
Expanding the System
You can expand the capabilities of the system by adding or upgrading internal devices. When
installing a device, be sure to read the instructions accompanying the device together with the
relevant section in this chapter.
6.1 Opening the Cover
CAUTION:
l
Static electricity can destroy electronic devices. Whenever you handle an option
outside of its protective packaging, first discharge any static electricity from your body
by touching a protective grounding device or unpainted metal on the rear panel of the
system before unplugging the power cord.
l
Before you install any option, turn all power switches off. Unplug all power cords from
the system and all peripherals. Leaving the power on can cause serious damage to
your sy stem.
l
If the system is mounted on an equipment rack, remove the system from the rack and
take it to a service area. Do not attempt to disassemble the system while it is still in the
equipment rack.
1. Turn off the power of the system.
2. Disconnect all power cords and cables from the system.
3. Remove t wo screws from the back of the system. Pull the cover backward to detach it.