Tyan Computer Transport GS10 B2094T15 - Manual (Page 30)

30
http://www.TYAN.com
2) Exits Setup.
F9 Restores the Setup defaults.
F10
Saves changes and exits Setup.
Main Menu
The Main menu contains the basic configuration settings of your system.
System Time sets the system time (Hour, Minute, Second).
System Date sets the system date (Day, Month, Year).
Primary/Secondary Master/Slave Each of these four items sets the type of the IDE device in
your system.
NOTE: Your computer cabinet can accommodate up to two IDE devices only although the
BIOS supports up to four devices.
Boot Features
Summary Screen enables or disables the displaying onscreen of various system information
while booting.
QuickBoot Mode sets if the system will skip certain tests while booting. This will de crease
the time needed to boot the system.
System Memory Shows the total memory on your system.
Extended Memory Shows the total extended memory on your system.
Advanced Menu
The Advanced menu contains the input/output configuration settings of the system.
Installed O/S sets the operating system to be installed.
Reset Configuration Data Normally, you would leave this field disabled. Select Yes to reset the
Extended System Configuration Data (ESCD) when you exit Setup if you have installed a new
add-on device and the system reconfiguration has caused such a serious conflict of resources that
the operating system cannot boot.
Large Disk Access Mode Select DOS or Other.
Local Bus IDE Adapter enables or disables the integrated local bus IDE adapter.
Legacy USB Support enables or disables support for Legacy Universal Serial Bus in
non-USB- aware operating systems like DOS.
Spread Spectrum enables or disables the Spread Spectrum function to reduce the EMI
(Electro-Magnetic Interference) effect .