2 installation instructions for linux redhat, Lcd driver – Tyan Computer Transport GS10 B2094T15 User Manual
Page 36
36
http://www.TYAN.com
5.2 Installation Instructions for Linux RedHat
LCD Driver
The LCD driver is required to enable your system to use the LCD panel to set the network, restart
and shutdown the server. To in stall this driver, follow these steps:
1.
Insert the driver CD into the CD drive.
2.
Browse to the following directory: /mnt/cdrom/ and create the following directory:
/tempLCD
.
3.
Unzip the LCDxx.tar.gz file located in the /mnt/cdrom/ directory into the
/tempLCD
directory. After unzipping, the following files should appear:
LCDdaemon
LCDInstall
readme.txt
4.
Run LCDInstall (./LCDInstall).
5.
Enable the LCD controller: