TurboChef Technologies Residential Single and Double Wall Oven - Manual (Page 44)

4.2 INFO MODE
Adjusting the Oven’s Units &
Measurements
Th e oven defaults to Fahrenheit. To change between
Fahrenheit and Celsius,
1. Ensure that the CookWheel is turned to off .
2. Press the Info key.
3. Scroll to and select “Oven Setup.”
4. Scroll to and select “Units & Measurements.”
5. Scroll to and select “Temperature.”
6. Turn the inner CookWheel knob to scroll to the
desired temperature measurement (Figure 4.7).
Th
e arrow indicates which setting is selected.
7. Press Back to return to previous screens.
Accessing Help Topics and
General Cooking Information
Th e Speedcook oven comes equipped with a variety
of helpful hints that cover a range of topics. Th is
information is located in two places - Help Topics and
Oven Tips.
To access Help Topics or Oven Tips,
1. Ensure that the CookWheel is turned to off .
2. Press the Info key.
3. Scroll to and select either Help Topics or
Oven
Tips.
4. Press Back to return to previous screens.
Adjusting Display Settings
To adjust the brightness of the oven display(s),
1. Ensure that the CookWheel is turned to off .
2. Press the Info key.
3. Scroll to and select Oven Setup.
4. Scroll to and select Display.
5. For Double Wall Oven models only, select
“Top Oven” or “Bottom Oven” (Figure 4.4).
6. If “Top Oven” was selected, scroll to and select
“Brightness.”
7. Adjust the brightness to the desired setting by
turning the inner CookWheel knob left or right
(Figure
4.5).
8. Press Start to confi rm selection.
9. Press Back to return to previous screens.
To adjust the color of the Speedcook oven display,
1. Ensure that the CookWheel is turned to off .
2. Press the Info key.
3. Scroll to and select Oven Setup.
4. Scroll to and select Display.
5. For Double Wall Oven models only, select
Top Oven (Figure 4.4).
NOTE: Th e color cannot be adjusted on the bottom
oven display if Bottom Oven is selected.
6. Scroll to and select Colors.
7. Change the color to the desired setting by
turning the inner CookWheel knob left or
right
(Figure 4.6).
8. Press Start to confi rm selection.
9. Press Back to return to previous screens.
Info
Oven Setup Display
Top Oven
Bottom Oven
Info
Oven Setup Display Colors
Orange
Pewter
Blue
Red
Info
Oven Setup Display Brightness
Adjust brightness
Info
... Units & Measurement
Fahrenheit
Celsius
Figure 4.4: Select Top or Bottom Oven Figure 4.6: Adjust Color
Figure 4.5: Adjust Brightness Figure 4.7: Changing Temperature Units